橡膠塑料介電擊穿強度試驗儀/耐電壓強度試驗機

橡膠塑料介電擊穿強度試驗儀/耐電壓強度試驗機

Dielectric breakdown strength tester

產品名稱：介電擊穿強度測定儀

Product name: dielectric breakdown strength tester

產品型號：BDJC-100KV

Product model: BDJC - 100 kv

控制方式：微機控制橡膠塑料介電擊穿強度試驗儀/耐電壓強度試驗機

Control mode: microcomputer control

滿足標準：GB1408-2006 絕緣材料電氣強度試驗方法

Meet the standard: GB1408 2006 insulation dielectric strength test method

GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗

GB/T1695-2005 rubber power frequency voltage breakdown strength and voltage resistance strength test

GB/T3333 電纜紙工頻電壓擊穿試驗方法

GB/T3333 cable ZhiGong frequency voltage breakdown test method

HG/T 3330絕緣漆漆膜擊穿強度測定法

HG/T 3330 insulating varnish film breakdown strength measurement

GB12656 電容器紙工頻電壓擊穿試驗方法

GB12656 ZhiGong frequency capacitor voltage breakdown test method

ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.

ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test method.

一、適用范圍及功能

A, scope and function

主要適用于固體絕緣材料（如：塑料、橡膠、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等介質）在工頻電壓或直流電壓下擊穿強度和耐電壓的測試。

Mainly applied to solid insulating material (such as plastic, rubber, thin film, resin, mica, ceramic, glass, insulating paint, etc.) under power frequency voltage or dc voltage breakdown strength and withstand voltage test.

本儀器由電腦控制，通過我公司自主研發的全新智能數字集成電路系統與軟件控制系統兩部分來完成，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據。可實時繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。

The instrument is controlled by computer, through my company independent research and development of new inligent digital integrated circuit system and the software two parts to complete the control system, make the pressure rise rate really uniform and accurate, and can accuray measure the data of leakage current. Can be real-time rendering test curve, according to the test data, accurate, and can save, analysis, print the test data.

自主知識產權（國內*，）

Independent inlectual property rights (the first domestic, international lead)

二、技術要求：

Second, the technical requirements:

01、輸入電壓： 交流 220 V

01, input voltage, ac 220 V

02、輸出電壓： 交流 0--100 KV ;

02, output voltage: communication 0-100 KV;

直流 0—100 KV

Dc 0-100 KV

03、電器容量： 5KVA

03, electric capacity: 5 kva

04、高壓分級： 0-10KV，0--50KV，0-100KV

04, high-pressure sizing: 0 to 10 kv, 0, 50 kv, 0-100 kv

05、升壓速率： 100V/S 200V/S 500 V/S 1000 V/S 2000V/S 3000V/S 等

05, pressure rise rate: 100 V/S/S/S 1000 V, 500 V, 200 V / 2000 V / 3000 V/S S S, etc

（備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）

(note: meet the standard requirements and can be set according to user requirements different pressure rise rate)

06、試驗方式：

06, test mode:

直流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗

Dc test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗

Ac test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

07、試驗介質：空氣，試驗油

07, test medium: air, test oil

08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。

08, installation high sensitivity of overcurrent protection device to ensure the sample breakdown when cut off the power supply within 0.05 S.

09、采用智能集成電路進行勻速升壓。

09, inligent integrated circuit is adopted to improve the pressure at a constant speed.

10、支持短時間內短路試驗要求。

10 short circuit test requirements, support for a short time.

11、電壓試驗精度： ≤ 1％。

11, voltage test accuracy: 1% or less.

12、試驗電壓連續可調： 0--100 KV。

12, test voltage adjustable: 0-100 KV.

13、電流可采集到m*。

13, current can be collected to mA.

14、出具*計量單位航天二院203所的校準檢定證書或出具客戶計量單位的證書。

14, issued by national level units of measure space 2 hospital 203 calibration verification certificate, or issue the certificate of customers specify the units of measurement.

三、安全保護

3, safety protection

本試驗儀器電路保護控制：

This test instrument circuit protection control:

（1）超壓保護 （2）過流保護 （3）短路保護（4）漏電保護 （5）軟件誤操作保護

(1) the overpressure protection over-current protection (2) (3) short circuit protection (4) leakage protection misoperation (5) software protection

高壓輸入回路斷電保護控制：

High voltage power input circuit protection control:

(1)總電源開關 (2)調壓器復位開關 (3)高壓斷電開關

(1) the total power switch (2) voltage regulator reset switch (3) the high voltage power switch

(4)試驗箱門安全開關 (5)高壓回路開關 (6)漏電保護開關

(4) test the door safety switch (5) high pressure circuit switch (6) leakage protection switch

四、設備主要配置

Four main configuration, equipment

設備標準配置

Equipment standard configuration

序號 名稱 配置 備注

Serial number name of the configuration notes

01 試驗主機 一臺

01 a test hosts

02 控制裝置 一套

02 a control device

03 試驗電極 二套(國標1408.1)

03 2 sets test electrode (1408.1 gb)

04 試驗油箱 二只

04 test two tank

05 放電系統 一套

A set of 5 discharge system

06 控制系統 一套

6 a set of control system

07 數據采集系統 一套

7 a set of data acquisition system

08 試驗軟件 一套 光盤

Test software is a set of CD

09 計算機 一套 品牌

09 computer a brand

10 噴墨打印機 一臺 品牌

10 a brand inkjet printer

11 產品使用說明書 一份

A 11 product instruction for use

12 計量證書 一份

12 a measurement certificate

13 產品合格證 一份

A 13 product certificate

五、此設備常規型號為：

Five, the conventional model is as follows:

BDJC-10KV

BDJC - 10 kv

BDJC-20KV

BDJC - 20 kv

BDJC-30KV

BDJC - 30 kv

BDJC-50KV

BDJC - 50 kv

BDJC-100KV

BDJC - 100 k